Steel sprocket. Replaces JT Sprockets JTF563-15.
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF563.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Steel sprocket. Replaces JT Sprockets JTR832-39.
Steel sprocket. Replaces JT Sprockets JTR832-41.
Steel sprocket. Replaces JT Sprockets JTR832-48.
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer cable length: 915mm. Outer top fitting: 90' bend, 10mm adjuster. Outer bottom fitting: standard ferrule. Inner cable overhang: 68mm. A...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR832.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR832.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR832.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR832.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
7 wires with bullet connectors. 2 keys included.
27mm tapering down to 14mm. Length 32cm. Suitable replacement aftermarket part for Yamaha Fizzy OEM numbers: 348-14753-00, 296-14753-02.
Mounting hole centres: 80mm. Centre tab: 53mm. Length: 30mm. Width: 8mm. Includes 2 tabs, 4 bolts and 4 nuts. Once fitted and tight lock the...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Replacement front fork gaiters suitable for the Yamaha FS1-E and many other models with similar fork dimensions. Rubber compound for water r...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 76mm. Width 41mm. Replacement aftermarket part f...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
