Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR855.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand update notice: US Powersports batteries are in the process of being re‑branded as MTX. While existing US Powersports branded stock r...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.7-0.8mm gap. Genuine NGK spark ...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
This kit includes the following bearings and two seals: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thickn...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Koyo 32005X. Inner diameter 25mm. Outer diameter 47mm. Width 15mm. Made in Japan. Bearing seal SKU: 013248. Replacement aftermarket part for...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 43.6mm. Inner diameter: 41.7mm. Width: 20mm. Thickness 0.95mm. Th...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Outer diameter 28.9mm and 32.0mm. Inner diameter 14.25mm. Width 16.25mm. Gasket: 32mm x 14mm x 11.5mm. Sealing ring: 25mm x 14mm x 5mm. Seal...
Koyo 6304 DDU. Inner diameter 20mm. Outer diameter 52mm. Width 15mm. Made in Japan.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Yamaha OEM 4TT-25937-00.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Outer diameter 12mm. Inner diameter 9.5mm. Stem 4.5mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Outer diameter 28.9mm and 32.0mm. Inner diameter 14.25mm. Width 16.25mm. Made in Taiwan. Replacement aftermarket part for the following OEM ...
Outer diameter 42mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Upper bearing: 25mm x 47mm x 15mm. Lower bearing: 30mm x 55mm x 17mm . Includes all bearings and seals. Heavy duty tapered roller bearings. ...
Piston outer diameter 25.5mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. R...
Suitable for Yamaha models. Piston outer diameter 30mm. Thinner Seal: T: 2.10mm x W: 2.20mm. Thicker Seal: T: 3.20mm x W: 3.20mm. Each kit c...
C-Max brand. Single bolt hole mount. Outer diameter 75mm. 116 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied ...
