Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
4 wires with female spade block connector. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR834.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Length 67mm. Width 42mm. 54mm between fixing hole centres. Replacement aftermarket part for Yamaha OEM 1UY-25852-00-00, 2GU-25852-00-00, 4L0...
Outer diameter: 14mm. Length: 41.6mm. Spring length: 49mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda ...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Replacement aftermarket part for Yamaha OEM 241-16341-01, 451-16342-00, 90506-07066, 353-16396-00, 93503-16010, 132-16346-00, 90113-06013, 9...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Non-diaphragm tap type. Made in Japan.
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Please Note: This speedo cable is 780mm/30.5" long so you may require a longer version as listed below: Length: 30.5" (780mm). Clo...
Inner diameter 30mm. Outer diameter 48mm. Width 14mm.
Suitable for Yamaha models. Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only ...
Note: The Fizzy FS1/FS1E used different condensers throughout models, so please check the image as you may need our SKU: 005012 with a singl...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
6v Universal Rectifier. Single bolt mounting. 2 wires with spade connectors. Plastic body. If this product is out of stock you can also use ...
Steel sprocket. Replaces JT Sprockets JTR834-49.
Left hand handlebar switch. Lights on, high-low, indicator and horn switches. 11 wires. Fits 7/8" handlebars.
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
Bore size 46.00mm. Gudgeon pin outer diameter 12mm. Crown height 17.5mm. Piston length 48.5mm. Ring peg position 28mm. 2 stroke. With ports....
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF563.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
