Piston outer diameter 38mm. Piston length 36.2mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Sui...
316L stainless steel. Piston outer diameter 38mm. Piston length 36.2mm. This kit includes a single piston with matching internal oil seal an...
Steel sprocket. Replaces JT Sprockets JTF560-14, JTF546-14.
Steel sprocket. Replaces JT Sprockets JTF560-15, JTF546-15.
Steel sprocket. Replaces JT Sprockets JTF560-12, JTF546-12.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Outer diameter (including teeth) 123mm. Thickness 3.5mm. Number of pegs 8. Replacement aftermarket part for the following OEM numbers: Yamah...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket. Replaces JT Sprockets JTR834-41.
Brand cross reference: Vesrah VD325, 81, Ferodo FDB311, SBS 550. You may need more than a single pair of pads if you have twin discs. Goldfr...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF546.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF546.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF546.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF413.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...
If your coil has 2 spades the second is for earth so before you fit the new one clean where it bolts to by scraping any paint or rust off th...
Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Steel sprocket. Replaces JT Sprockets JTR834-48.
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
6 wires with male bullet block connector. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR834.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
35mm is the outside diameter of your carburettor intake. Filter is 43mm long.
Please Note: This speedo cable is 900mm (35.5") long so you may require a shorter version as listed below: Length: 35.5" (900mm). ...
Please Note: This speedo cable is 780mm/30.5" long so you may require a longer version as listed below: Length: 30.5" (780mm). Clo...