This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Outer diameter 62mm. Inner diameter 35mm. Width 5mm.
Two Pins. As fitted to Kawasaki and late Yamaha models. Reference: FE246BH, FE218BH, 066500-4010, 066500-4020Replacement aftermarket part fo...
Bend the steel wire to suit or use your original if need be and hook to the switch. Brake light switch with lead. 2 wires with bullet connec...
Steel sprocket. Replaces JT Sprockets JTR839-53.
Brake light switch with lead. Small push-in type. 2 wires with bullet connectors.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine w...
Steel sprocket. Replaces JT Sprockets JTR839-55.
Steel sprocket. Replaces JT Sprockets JTR839-57.
Steel sprocket. Replaces JT Sprockets JTF587-19.
Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre e...
12V 2.5AH CCA 40. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 113mm x Width: 38mm x H...
Steel sprocket. Replaces JT Sprockets JTF587-20.
6 wires with male spade block connector. 2 keys included.
Brand: JT Sprockets. Position: Front. Tooth Count: 19. JT Part Number: JTF1587.19. Type: Standard. Material: Steel. Fitment: Direct replacem...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Thread 8mm. Length 35mm. Pitch 1.25mm.
Suitable for Sport, Touring and Off-Road Use. XW-Ring Chain. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (o...
Length: 34.5" (885mm). Clock fit: screw over 11mm. Tacho drive end: push in 19mm. Inner type: square/square. Replacement aftermarket pa...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
With Staggered Pins.
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
This kit includes the following bearings: Top bearing type 1: ID 25mm x OD 43mm x W 11mm. Top bearing type 2: ID 27mm x OD 43mm x W 11mm. Bo...
Outer diameter 16.90mm. Length 43.00mm. Thickness 2.30mm. Heavy duty clutch springs.
Outer diameter 30mm. Set is enough for 1 carburettor.
Inner diameter 30mm. Outer diameter 48mm. Width 12mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
ID: 26/39mm. Bolt mounting centres: 70mm. Also known as carburettor intake manifold rubbers. Made in Japan. Replacement aftermarket part for...
