Thread 12mm x hex 18mm x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Special design. 0.9mm (0...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR300.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR300.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Fits cam chains supplied by us only.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Outer diameter 245mm. Inner diameter 115mm. 6 bolt holes. 8mm bolt holes. Non-countersunk. Made in Japan.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Outer diameter 46mm. Inner diameter 37mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Yamaha OEM 4TT-25937-00.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 20mm. 1 x shaft OD 17mm x ID 12mm x length 30mm...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thickness 17mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Suitable for Yamaha models. Piston outer diameter 30mm. Thinner Seal: T: 2.10mm x W: 2.20mm. Thicker Seal: T: 3.20mm x W: 3.20mm. Each kit c...
Suitable for Yamaha models. Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only ...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Piston outer diameter: 41mm. Oil seal: 2.95mm x 3.2mm. Dust seal: 2.0mm x 1.5mm. This kit contains an inner oil seal and an outer dust seal....
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
