Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Steel sprocket. Replaces JT Sprockets JTR842-52.
Steel sprocket. Replaces JT Sprockets JTR842-50.
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Steel sprocket. Replaces JT Sprockets JTR842-37.
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
The TreadA great knobby, especially suited to classic Enduros or military bikes. Using a progressive knob design, loading with mud or snow s...
Inner diameter 30mm. Outer diameter 48mm. Width 14mm.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF1263.13. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Replacement aftermarket part for for the following OEM numbers: Yamaha 207-81326-10-00, 207-81326-90-00. and many more TBA. This will suit t...
Replacement for DH-45, H85. Pivot pin length 25mm. Replacement aftermarket part for Yamaha OEM 443-81321-10. These will also fit a Yamaha DT...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
