Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thread 12mm x hex 18mm x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre electrode. 0.7...
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Steel sprocket. Replaces JT Sprockets JTR842-52.
Steel sprocket. Replaces JT Sprockets JTR842-50.
Steel sprocket. Replaces JT Sprockets JTR842-37.
For use with bulbs up to 10 watt.
Brake light switch with lead. Lead length 12cm. 2 wires with bullet connectors. Comes with spring. Replacement aftermarket part for Yamaha O...
Replacement aftermarket part for the following OEM numbers: Yamaha 3UH-E3440-00, 5H0-13440-00, 5H0-13440-09. This will suit the following mo...
Brake light switch with lead. Small push-in type. 2 wires with bullet connectors.
Top 1 outer length: 995mm. Outer top 1 fitting: 90' bend, 10mm adjuster (1.00mm pitch). Outer bottom 1 fitting: 6mm screw over. Top 1 inner ...
Thread 12mm x hex 18mm x pitch 1.25mm. Heat range 8. 19mm (3/4") reach. Special design. 0.7-0.8mm gap.
Thread 8mm. Length 35mm. Pitch 1.25mm.
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Fits cam chains supplied by us only.
3 hole seal outer diameter 23mm. Made in Japan.
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Outer cable 1200mm. Overhang 100mm. Replacement aftermarket part for Yamaha OEM 1M1-26341-00, 498-26341-00, 498-26341-01, 15A-26341-00, 498-...
Outer diameter 12mm. Inner diameter 9.5mm. Stem 4.5mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Outer diameter 58mm. Inner diameter 47mm. Width 7mm.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Inner diameter 30mm. Outer diameter 48mm. Width 12mm.
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
