Yamaha YZ125 1989 Parts

134mm x 3mm Clutch Friction Plate with 16 Pegs

Outer diameter (including teeth) 134mm. Thickness 3mm. Number of pegs 16. Replacement for Vesrah VP2054.

NGK BR9EG Racing Spark Plug

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Fine wire nickel alloy centre ele...

WRP 24-2021 Crank Shaft Seal Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

120mm x 1.5mm Clutch Metal Plate with 20 Pegs

Outer diameter 120mm. Thickness 1.5mm. Number of pegs 20.

JT Sprockets 13 Tooth Front Sprocket JTF564.13

Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF564.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...

WRP 822116 Oil Seal Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

WRP 26-1780 Carb Rebuild Kit

Performance Upgrade: Replaces worn or damaged parts with, in many cases, upgraded materials such as high-performance interface gasket materi...

Engine Gasket Set - 010516

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

41.75mm x 39.75mm x 19.8mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 41.75mm. Inner diameter 39.75mm. Width 19.8mm. Thickness 1mm. Repl...

47mm x 28mm x 7mm Wheel Oil Seal T3600701

Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600701 (Front lef...

8mm x 28mm Rear Sprocket Bolts

Flat head countersunk bolts. Thread 8mm. Length 28mm. Pitch 1.25mm.

8mm x 12mm Rear Sprocket Locking Flange Nuts

Thread 8mm. Spanner size 12mm.

WRP 60-1000 Fuel Tap Repair Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

White Competition Front Number Board

All Balls 56-129 Fork Oil Seal & Fork Dust Seal Kit

Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...

WRP 37-1202 Shock Bumper

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

30mm x 52mm x 1.5mm Steering Head Taper Bearing Seal

Inner diameter: 30mm. Outer diameter: 52mm. Width: 1.5mm.

30mm x 52mm x 1.5mm Steering Head Taper Bearing Seal

Inner diameter: 30mm. Outer diameter: 52mm. Width: 1.5mm.

TourMax Fuel Tap Repair Kit - 023532

3 hole seal outer diameter 23mm. Made in Japan.

IRIS 520RXP-116 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...

All Balls 18-1007 Brake Master Cylinder Rebuild Kit

Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.

46mm Round Master Cylinder Reservoir

Outer diameter 46mm. Single bolt mount. Bottom outlet takes 12mm ID pipe.

IRIS 520HTP-116 Gold O-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...

All Balls 57-107 Fork Dust Seal Kit

Kit contains a pair of fork dust seals.

RK 520-116L ZXW XW-Ring Super Heavy Duty Gold Drive Chain

RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...

All Balls 18-7002 Brake Pad Retaining Pin Kit

Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...

28mm x 52mm x 16mm Steering Head Bearing

Inner diameter 28mm. Outer diameter 52mm. Width 16mm.

28mm x 52mm x 16mm Steering Head Bearing

Inner diameter 28mm. Outer diameter 52mm. Width 16mm.

10mm x 100mm Gear Lever with Folding Toe Peg Yamaha 1LX-18110-00

10mm spline size. 100mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg. Replacement ...

RK 520H-116L Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...