Home
Honda
CR500
R 1987
Ignition Coils
12v Ignition Coil ZC003-12 58439006000 800075346 M02812110 (80mm)

12v Ignition Coil ZC003-12 58439006000 800075346 M02812110 (80mm)

£26.40

Includes 20% VAT

Out of Stock

We cannot say when this item will be back in stock due to global events beyond our control.

This product fits the Honda CR500 R 1987 model.

Pack size: Each

SKU: 005094

High performance 12v CDI ignition coil
2 fixed wires - 1 bullet connector and 1 earth ring
Centre-to-centre distance between mounting holes: 80mm
Single replaceable HT lead
Primary resistance 0.45Ω
Secondary resistance 9.65kΩ
HT lead length 14cm - Some Honda's require 30cm-50cm
Extra lead SKU: 005076 or SKU: 023734
Replaces: TEC ZC003-12v

The resistance values (if shown above) are a guide for this grouped replacement family and may not be the exact factory specification for every OEM number listed.

Replacement aftermarket part for the following OEM numbers:

Gas Gas M02812110, ME12634006, ME25634006
Honda 30500-KZ3-700, 30500-KZ3-701, 30500-KZ4-003, 30500-GS2-005, 30500-MN9-006, 30500-KS6-701
Husqvarna 800075346, 58439006000
Kawasaki 21121-1312
KTM 58439006000
and many more TBA

If your ignition coil has two primary wires and it is not obvious which way round these connect, please do not assume this automatically means the coil is faulty. On many coils the two primary connections are simply the two ends of the same winding, however some ignition systems are polarity sensitive, so it is always best to check against the wiring diagram or test results for your particular bike.

If you wish to test coil polarity, connect a voltmeter with the negative lead inside the spark plug cap or HT lead so it touches the metal or carbon inner, and the positive lead to a good earth point such as the engine block. Set the meter to a high voltage range and crank the engine over, there is no need to start it. A normal connection will usually show an upward movement of the needle or reading. If the reading swings the opposite way, reverse the two primary wires and test again.

Replacement ignition coils may give resistance readings that differ from genuine items or from figures shown in some manuals, and this will not always indicate a fault. When checking a coil, look for readings that are stable and repeatable. As a very general guide, primary resistance can range from approximately 0.6 to 5.0 ohms, with higher figures often found on older machines, and secondary resistance can range from approximately 6kΩ to 14kΩ, again depending on the application and whether caps are fitted. A coil is more likely to be faulty when readings are open circuit, short circuit, or vary significantly between repeated tests.

Before You Place Your Order...

Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
Check the fitment list to ensure this item will fit your vehicle
When we refer to right or left, this is as you sit on your vehicle
To find part by SKU, enter the number without "SKU" into the search box
Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.