Straight TR4 valve.
Inner diameter 40mm. Outer diameter 52mm. Thickness 10mm.
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Straight TR6 valve.
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Brand cross reference: EBC 298, SBS 547, Vesrah VD974. You may need more than a single pair of pads if you have twin discs. Goldfren AD HH s...
Steel sprocket. Replaces JT Sprockets JTF402-16.
Brand cross reference: Vesrah VD927, EBC 163, Ferodo FDB529, SBS 641. You may need more than a single pair of pads if you have twin discs. G...
Steel sprocket. Replaces JT Sprockets JTF402-17.
Steel sprocket. Replaces JT Sprockets JTF402-15.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 10. 19mm (3/4") reach. 0.6mm fine wire iridium centre e...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF402.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 10. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap....
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings.
Outer diameter 56.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Bore size 55.00mm. Gudgeon pin outer diameter 15mm. Crown height 22mm. Piston length 60mm. Ring peg position 26.5mm. 2 stroke. Without ports...
Bore size 55.50mm. Gudgeon pin outer diameter 15mm. Crown height 22mm. Piston length 60mm. Ring peg position 26.5mm. 2 stroke. Without ports...
Bore size 54.00mm. Gudgeon pin outer diameter 15mm. Crown height 22.5mm. Piston length 63.5mm. Ring peg position 26mm. 2 stroke. Without por...
