Straight TR4 valve.
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Steel sprocket. ID 58mm. PCD (Pitch Circle Diameter) 90mm. Mounting holes OD 4 at 8.5mm and 4 at 10.5mm (Fits larger range). Wheel indent 1....
Brand cross reference: Vesrah VD120, VD333; 54; Ferodo FDB250; SBS 536. You may need more than a single pair of pads if you have twin discs....
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket. Replaces JT Sprockets JTF259-14. Replacement aftermarket part for the following OEM numbers: . Daelim 23801-BA6-8900-M1Honda...
Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR269.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR269.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF259.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR269.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Half thread (12.7mm threaded). 0....
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
