This wheel bearing kit uses premium quality Japanese Koyo bearings.
Steel sprocket. Replaces JT Sprockets JTF736-15.
12v ignition coil. 2 spade terminals. Fits front or rear on V-twins. Fits left or right on twins. Centre-to-centre distance between mounting...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF736.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Important Triumph Fitment Information: Triumph changed battery size during production on some models, so two different battery sizes may be ...
Steel sprocket. Replaces JT Sprockets JTR735-42.
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR735.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 320mm. Inner diameter 64mm. 10mm off-set. 6 bolt holes. 10mm bolt holes. PCD 80mm. Non-countersunk. Replacement aftermarket p...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Brand cross reference: Vesrah VD911, VD948; 47; Ferodo FDB207/R, FDB705; SBS 519. You may need more than a single pair of pads if you have t...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Inner diameter: 35mm. Outer diameter: 55mm. Width: 14mm. Koyo 32907 JR-3. Made in Japan. Replacement aftermarket part for the following OEM ...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Note: 10mm thread (No 8mm Adaptors) use your originals. The right-hand mirror has a left-hand thread therefore you may need a pair of our mi...
IMPORTANT - Please Note: The HT lead is only 170mm in length and for many models you will need a meter of our 7mm HT lead SKU: 023734 or 5 m...
