Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF736.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
2 spade terminals, not wires as on the Honda NX500, NX650. Slimmer body than the other 80mm centre coils. 12v ignition coil. 2 spade termina...
12V 20.5AH CCA 230. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 207mm x Width: 72mm x...
Outer diameter 320mm. Inner diameter 64mm. 10mm off-set. 6 bolt holes. 10mm bolt holes. PCD 80mm. Non-countersunk. Replacement aftermarket p...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Brand cross reference: Vesrah VD911, VD948; 47; Ferodo FDB207/R, FDB705; SBS 519. You may need more than a single pair of pads if you have t...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Inner diameter: 35mm. Outer diameter: 55mm. Width: 14mm. Koyo 32907 JR-3. Made in Japan. Replacement aftermarket part for the following OEM ...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
Equivalent to LD05F. Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. ...
