Made in Japan. Replacement aftermarket part for the following OEM numbers: Ducati, Cagiva 54040111C, 54040101A, 54040111A, 54040261A. and ma...
Steel sprocket. Replaces JT Sprockets JTF736-15.
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
12v ignition coil. 2 spade terminals. Fits front or rear on V-twins. Fits left or right on twins. Centre-to-centre distance between mounting...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF736.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
12V 20.5AH CCA 230. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 207mm x Width: 72mm x...
Outer diameter 320mm. Inner diameter 64mm. 10mm off-set. 6 bolt holes. 10mm bolt holes. PCD 80mm. Non-countersunk. Replacement aftermarket p...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Inner diameter 42mm. Outer diameter 54mm. Thickness 11mm.
IMPORTANT - Please Note: The HT lead is only 170mm in length and for many models you will need a meter of our 7mm HT lead SKU: 023734 or 5 m...
Equivalent to LD05F. Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. ...
