Outer diameter 245mm. Inner diameter 115mm. 6 bolt holes. 8mm bolt holes. Non-countersunk. Made in Japan.
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Brand cross reference: Vesrah VD262; 244; Ferodo FDB2042; SBS 706, 727. You may need more than a single pair of pads if you have twin discs....
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Brand cross reference: 266, Ferodo FDB2074, SBS 730, Vesrah VD964. You may need more than a single pair of pads if you have twin discs. Gold...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Replacement aftermarket part for the following OEM numbers: Ducati 09 054 99 60, 444.4.003.4A/5A/8A, 444.4.017.1A. This will suit the follow...
Height 81mm. Width 79mm. Thread 14mm. Pitch 1.50mm. Replacement for Hiflofiltro HF153, Champion H301. This filter does not come with an O-ri...
Steel sprocket. Replaces JT Sprockets JTF736-15.
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine w...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF736.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 12mm x hex 5/8" (16mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm ga...
Important Triumph Fitment Information: Triumph changed battery size during production on some models, so two different battery sizes may be ...
Steel sprocket. Inner diameter: 100mm. Outer diameter: 123mm. 6 holes. Replaces JT Sprockets JTR735-45.
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR735.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 320mm. Inner diameter 64mm. 10mm off-set. 6 bolt holes. 10mm bolt holes. PCD 80mm. Non-countersunk. Replacement aftermarket p...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
