Honda changed the fuel tap thread on some models like the TL125. This tap is M14 × 1.0mm, please check the thread in your tank before ordering. Noted that one competitor list a M14 x 1.25 which is our SKU: 018042
How to measure your fuel tank thread:
If your tank has a threaded spigot, measure across the outside of the thread from one side to the other, ideally with a vernier caliper.
For example, if it measures about 12mm, the tank thread is M12 and you need a fuel tap with an M12 female thread. If it measures about 14mm, the tank thread is M14 and you need a fuel tap with an M14 female thread.
How to measure your fuel tap thread:
Measure across the inside of the threaded hole in the tap body or nut at the widest point of the thread.
For example, if the internal diameter measures about 12mm, the tap has an M12 female thread and will fit a tank with an M12 male thread. If it measures about 14mm, it is an M14 female thread to suit an M14 tank thread.
Replacement aftermarket part for for the following OEM numbers:
This will suit the following models as well as those listed in fitments:
All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.
