Thread 8mm. Length 30mm. Pitch 1.25mm.
Outer diameter 33mm. Inner diameter 25.6mm. Depth 4mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of ...
Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.
Diameter 17". Width 1.6". Genuine Takasago. This wheel is marked with size and brand name - Takasago on the side of the rim. Repla...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
Overall length: 100mm from inside of the two bends. Main body: 45mm for the coiled spring section. Replacement aftermarket part for Honda OE...
Outer diameter 33mm. Inner diameter 24mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Koyo 6201DDU. Double sided rubber sealed. Outer diameter 32mm. Inner diameter 12mm. Width 10mm. Made in Japan. Replacement aftermarket part ...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Replacement aftermarket part for Honda OEM 50500-KPH-970.
Drive chain case ANF125 upper and lower sections included. Length: 550mm. Measurement between holes: 280mm. Finish: NH364M (Silver). Replace...
Does not include spring. Replacement aftermarket part for Honda OEM 50530-KPH-970.
Piston outer diameter 25.5mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. R...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
2 bolt hole type. 30mm between bolt hole centres.
High and low.
For use on 12v bulbs upto 23w.
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
This kit includes only the items shown in the image. This may or may not be enough for your vehicle depending on its model. Please check bef...
Replacement aftermarket part for Honda OEM 24701-KTM-D20
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Includes top end gaskets.
C-Max brand. Single bolt hole mount. Outer diameter 75mm. 116 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied ...
Outer diameter 52.50mm. 4 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
This kit includes the following parts: Con rod. Gudgeon pin. Big end needle bearing.
