Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Made in Japan. Replaces Honda 45520-MG7-000 .
WRP CV Boots are manufactured from high-performance DCR66 rubber. Installation is straightforward using the supplied easy fit mounting clamp...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1228, 9...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Piston outer diameter 27mm. Piston length 28mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Mould...
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends.
Change the CV boot while out on the trail without having to disassemble the CV axle. Expandable yet durable material - specifically designed...
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 4...
Automatically isolates secondary (accessory) battery from primary (starting) battery. Prevents primary battery from draining when vehicle is...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
316L stainless steel. Piston outer diameter 27mm. Piston length 28mm. This kit includes a single piston with matching internal oil seal and ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-166-016.
Outer diameter 29mm. Inner diameter 18mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Honda 91203-KEJ-900, 91204-...