Early Honda style. Right-handed 8mm clockwise thread. Glass outer diameter 98mm. Total outer diameter 110mm. Stem length 130mm. 52mm from be...
Outer diameter 58mm. Inner diameter 45mm. Width 7mm.
Replacement aftermarket part for the following OEM numbers: Honda 17211-041-005.
Outer diameter 97mm. Thickness 1.5mm. Number of pegs 8.
Steel sprocket ID including splines: 15mm. ID without splines: 17mm. Gap between each spline: 4mm. Bolt hole centres: 28mm and 30mm. Number ...
Brake light switch with lead. 2 wires with bullet connectors. Replacement aftermarket part for the following OEM numbers: Honda 35350-086-72...
Replacement aftermarket part for the following OEM numbers: Honda 17211-041-005. Hiflofiltro air filters aren't just about keeping dirt out;...
130mm approx length. Replacement aftermarket part for Honda OEM 53175-001-000, 53175-046-810, 53170-041-000, 53175-087-760.
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF253.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF253.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF253.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Steel sprocket. Replaces JT Sprockets JTR257-40.
Outer diameter 96mm. Thickness 3.7mm. Number of pegs 17. Replacement for Vesrah VP1012.
Outer diameter 94mm. Thickness 1.3mm. Number of pegs 8 x 2.
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR257.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR257.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR257.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR257.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Heat range 7. 12.7mm (1/2") reach. Standard 2.5mm copper core centre electrode. Spec...
2 wires with bullet connectors. 2 keys included.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...
Includes sprocket and bearing.
