Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
2 wires with bullet connectors. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR257.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR257.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR257.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Heat range 6. 12.7mm (1/2") reach. Standard 2.5mm copper core centre electrode. Spec...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...
Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...
Includes sprocket and bearing.
Endless cam chain. Length: 82 links. Pitch: 6.35mm. Roller width: 3.18mm. Overall width: 16.6mm. Made in Japan. Fitting Endless Cam Chains â...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Fits cam chains supplied by us only.
Thread outer diameter 30mm. Pitch 1.50mm.
Outer diameter 33mm. Inner diameter 24mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Length of smooth section: 70mm. Thread for mounting: 10mm. Thread pitch: 1.25mm. This indicator stem fits front right, front left, rear righ...
Outer diameter 33mm. Inner diameter 25.6mm. Depth 4mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of ...
Replacement aftermarket part for the following OEM numbers: Honda 42711-GK4-605, 44711-GB6-882, 42711-GK4-603, 42711-GK4-604, 42711-GK4-602,...
Replacement aftermarket part for the following OEM numbers: Honda 44711-041-003, 44711-041-006, 44711-041-154. The Tread and RubberAn aggres...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
35mm is the outside diameter of your carburettor intake. Filter is 43mm long.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Bosch Type BA20D bulb holder use our SKU: 018112.