Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR257.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR257.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR257.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR257.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
4 wires with bullet connectors. 2 keys included.
Outer diameter 110mm. Width 25mm. Springs available separately SKU: 001876. Replaces the following brand numbers: Agpa M301. Cobreq 0304-CP....
Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...
Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...
Includes sprocket and bearing.
Outer diameter 30mm. Inner diameter 19mm. Width 5mm.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Outer diameter 33mm. Inner diameter 25.6mm. Depth 4mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of ...
Please Note: This taillight is fitted with a 12v bulb so unless you have your original 6v bulb please order our SKU: 018262 which are BAY15D...
Width: 127mm. Height: 90mm. Depth: 63mm. Compatible with Stanley H-120, HM-12RC, HM-15RC. Replacement aftermarket part for for the following...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This indicator stem fits front right, front left, rear right & rear left. 8mm thread for mounting x 25mm length. 15mm actual stem length...
Fits cam chains supplied by us only.
Front Cover for Honda's listed that use a rectangle air filter. Replacement aftermarket part for Honda OEM 64301-087-710, 64301-041-690, 643...
Outer diameter 33mm. Inner diameter 24mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
35mm is the outside diameter of your carburettor intake. Filter is 43mm long.
