Honda C90 ZZ 1982 Parts

6v DC Ignition Coil Single Output + 2 Wires (90mm)

Please Note: The HT lead at 380mm might be too short for your C90 so please add to your order one metre of HT lead SKU: 023734. 6v DC igniti...

Engine Gasket Set - 009879

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

8 Wire Ignition Switch - 006637

8 wires with female spade block connector. 2 keys included.

22mm x 13mm x 5mm Crank Oil Seal

Outer diameter 22mm. Inner diameter 13mm. Width 5mm.

7 Wire Ignition Switch - 006638

7 wires with female spade block connector. 2 keys included.

NGK D6HA, D6HS Spark Plug (Japan)

Thread 12mm x hex 18mm x pitch 1.25mm. Heat range 6. 12.7mm (1/2") reach. Special design. 0.7-0.8mm gap.

Fork Repair Kit with Grease Nipple Bolts

Brake Cable 58100-26000 45450-GB4-600 22F-26341-02

Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...

Sprocket Carrier Stub Axle Honda 42303-041-000 90307-001-000

Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...

Sprocket Carrier Honda C50, C70 & C90 (Includes Sprocket & Bearing)

Includes sprocket and bearing.

Heavy Duty Centre Stand Honda C90 50500-046-670B

Pivot pin required for this stand SKU: 012954. Fits several Honda C90 models Check Fitments. Replacement aftermarket part for Honda OEM 5050...

Kickstart Shaft Honda 28251-086-701

Overall length 195mm. Replacement aftermarket part for Honda OEM 28251-086-701.

Steering Head Ball Bearing Kit - 013072

This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...

Rear Light Honda 33701-077-671 (Taillight) (HM-11RC - HM-15RC)

Please Note: This taillight is fitted with a 12v bulb so unless you have your original 6v bulb please order our SKU: 018262 which are BAY15D...

Engine Oil Seal Kit - 007888

25H Timing Cam Chain Rivet Link

Fits cam chains supplied by us only.

8mm x 13mm Rear Sprocket Nuts

Thread 8mm. Spanner size 13mm. Pitch 1.25mm.

30mm x 1.5mm Chrome Tappet Covers

Thread outer diameter 30mm. Pitch 1.50mm.

6V 10/3W Stop & Tail Rear Light Bulbs

15mm Chrome Indicator Stem

This indicator stem fits front right, front left, rear right & rear left. 8mm thread for mounting x 25mm length. 15mm actual stem length...

70mm Chrome Indicator Stem 90154-455-670 90154-413-013

Length of smooth section: 70mm. Thread for mounting: 10mm. Thread pitch: 1.25mm. This indicator stem fits front right, front left, rear righ...

TourMax 3.65mm x 11mm K7 Type Float Valve without Wire Clip

Made in Japan.

Steering Head Taper Bearing Kit SSH050 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...

Red 35mm Ridged Foam Power Air Filter

35mm is the outside diameter of your carburettor intake. Filter is 43mm long.

6V 5W BA15s Indicator Bulbs

Black 35mm Ridged Foam Power Air Filter

35mm is the outside diameter of your carburettor intake. Filter is 43mm long.

6V 25/25W Bosch Type BA20D Halogen Headlight Bulbs

Bosch Type BA20D bulb holder use our SKU: 018112.

6V 25/25W Bosch Type BA20D Headlight Bulbs

Bosch Type BA20D bulb holder use our SKU: 018112.

24mm x 41mm x 12.5mm Steering Head Bearing

Inner diameter 24mm. Outer diameter 41mm. Width 12.5mm.

22.5mm x 41mm x 12.5mm Steering Head Bearing

Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.