Fits NGK D series plugs with threaded terminals. 102 degree elbow. 10-12mm. 5 kilo ohm. 70mm from end to elbow. Terminal stud. Replacement a...
6 wires. Replaces Shindengen SH532C-13, SH232-12, SH532-12, SH535C-11. Replacement aftermarket part for the following OEM numbers: Honda 316...
Steel sprocket. Replaces JT Sprockets JTF270-13.
Steel sprocket. Replaces JT Sprockets JTF270-14.
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
12V 8AH CCA 115. Terminals: 2 (1 positive + 1 negative). Complete with battery terminals & connections. Length: 114mm x Width: 70mm x He...
Brake light switch with lead. Lead length 32cm. Male block connector. Replacement aftermarket part for Honda OEM 35350-KR3-671.
Steel sprocket. Replaces JT Sprockets JTR273-39.
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF270.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Steel sprocket. Replaces JT Sprockets JTR273-44.
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF270.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
Replacement aftermarket part for the following OEM numbers: Honda 17211-KEB-900. This will suit the following models as well as those listed...
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR273.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
10mm thread. Male / female. Designed to fit between mirror and stem for part numbers 011882 and 011919. Can be used to increase the height o...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Outer diameter 18.20mm. Length 37.00mm. Thickness 2.80mm. Heavy duty clutch springs.
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.
Outer diameter of the cap body that sits over the tank filler neck: 39mm. Includes keys. Replacement aftermarket part for Honda OEM 17620-KR...
This inner tube fits the following tyre sizes: 130/90-15/16, 140/80-15/16, 140/90-15/16, 150/80-15/16, 150/90-15/16, 160/70-15/16, 160/80-15...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Bore size 44.50mm. Gudgeon pin outer diameter 13mm. Crown height 14.5mm. Piston length 45mm. 4 stroke. Without ports. Prior to installing a ...
