This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Inner diameter 43mm. Outer diameter 54mm. Thickness 11mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43.1mm. Width 15mm. Thickness 1.95mm. Replace...
Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Note: This seal has a 47.0 mm outer diameter. OEM spec is 47.2 mm. Please confirm fitme...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
Outer diameter 55mm. Inner diameter 45mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Honda 91258-ML7-003, 91258-...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
Height 67mm. Width 69mm. Thread 20mm. Pitch 1.50mm. Replacement for Hiflofiltro HF204, HF128. This filter does not come with an O-ring. This...
Please note that the CB1000R/RA, VFR400, VFR750F, VFR800 and RVF750R looks like they use two of these bearings for the rear left hand side o...
Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
These inner bushes are not applicable for the Aprilia RSV Factory with Ohlins forks. Upper or Lower depending on whether standard or USD for...
Please note that the CB1000R/RA, VFR750F and VFR800 looks like they use two of these bearings for the rear wheel hub sprocket carrier. Koyo ...
Includes all the parts you need. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies on two factors: a...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Outer diameter 62mm. Inner diameter 50.2mm. Width 5mm.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies o...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 43520-MG9-315. and many more TBA. These will suit the follo...
This kit includes only the items shown in the image. This may or may not be enough for your vehicle depending on its model. Please check bef...
This will suit the following models as well as those listed in fitments: Honda CBF1000 2011-15. Honda CBF1000 F/FA 2016.
Brand cross reference: EBC 390, Vesrah VD170, SBS 809, Ferodo FDB2181, Dunlopad DP950. You may need more than a single pair of pads if you h...
Please Note: You will need 2 metres of HT lead for each coil on bikes such as the Honda V-Twins. Search for our SKU number 005076 for five m...
Replacement aftermarket part for the following OEM numbers: Honda 17210-MFN-D02. This will suit the following models as well as those listed...
