Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Centre to centre of screw mounting holes: 62mm. Outer diameter of where this lens connects to the indicator: 71mm. Replacement aftermarket p...
Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Robust, lightweight, and weather resistant. Complete with bulbs and wiring. Fits front left & right & rear left & right. Include...
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Honda changed the fuel tap thread on some models like the TL125. This tap is M14 × 1.0mm, please check the thread in your tank before order...
Can be fitted to our indicator SKU numbers 018721, 018722, 018744.
Outer cable length: 845mm. Inner cable length: 80mm. Top fitting: 10mm thread. Bottom fitting: standard ferrule. Top nipple: pull choke. Bot...
If you're working on a vintage or classic motorcycle and the original air filter isn’t available anymore, our foam air filter sheets can b...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Suitable for motorcycles up to 175cc. 330mm centre to centre of bolt holes. Top pin hole ID 12mm - width 18mm. Bottom pin hole ID 10mm - wid...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
Straight TR4 valve.
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends.
Outer diameter 50mm. Inner diameter 40mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Honda 91258-410-013, 91258-...
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Lens size: 120mm x 110mm. Replacement lens for our SKU: 019305. Replacement aftermarket part for the following OEM numbers: Honda 33702-329-...
6V 21/3W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable f...
For 6v models you will need our SKU: 018262 - 6v 21/3w stop & tail rear light bulbs. Width: 120mm. Height: 115mm. Depth: 77mm approx. Mo...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Both mirrors have right hand thread. Glass outer diameter 95mm. Total outer diameter 110mm. 150mm Stem length from mirror to bend. 60mm from...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
