Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Piston outer diameter 27mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Made in Japan. Replaces Honda 45520-MG7-000 .
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Replacement aftermarket part for the following OEM numbers: Honda 34903-388-611, 34903-KCS-920. and many more TBA.
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
316L stainless steel. Piston outer diameter 27mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and ...
Outer diameter 14mm. Inner diameter 6.5mm. Width 7mm.
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Thread: M20 x 1.5mm. Length 70mm. Replacement aftermarket part for Honda OEM 15420-415-000, 15420-447-770, 15420-MA6-000, 15420-HN2-000, 154...
Outer diameter 50mm. Inner diameter 40mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Honda 91258-410-013, 91258-...
Outer length: 985mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 61mm. Inner top nipple: barrel...
10mm thread. Male / female. Designed to fit between mirror and stem for part numbers 011880 and 011881. Can be used to increase the height o...
Bearings: OD: 26mm x ID: 20mm x Height: 16mm. Made in Japan. Replacement aftermarket part for for the following OEM numbers: Honda 52108-356...
Lens dimensions: Length: 70mm x Width: 30mm x Height: 60mm. Replacement aftermarket part for Honda OEM 33402-MG2-003, 33402-KEJ-900, 33402-K...
