Inner diameter 35mm. Outer diameter 48mm. Thickness 11mm. Replacement aftermarket part for the following OEM numbers: Honda 91255-KBH0-03, 9...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Width: 127mm. Height: 90mm. Depth: 63mm. Compatible with Stanley H-120, HM-12RC, HM-15RC. Replacement aftermarket part for for the following...
Please Note: This taillight is fitted with a 12v bulb so unless you have your original 6v bulb please order our SKU: 018262 which are BAY15D...
Straight TR6 valve.
Inside Diameter 49mm. Made in Japan. Replacement aftermarket part for Honda OEM 43513-422-671, 43513-443-761, 43513-445-006, 43513-461-771, ...
Both mirrors have right hand thread. Glass outer diameter 95mm. Total outer diameter 110mm. 150mm Stem length from mirror to bend. 60mm from...
Thread: M20 x 1.5mm. Length 70mm. Replacement aftermarket part for Honda OEM 15420-415-000, 15420-447-770, 15420-MA6-000, 15420-HN2-000, 154...
Straight TR4 valve.
Stem length from mirror body to bend: 150mm. From bend to end of thread: 60mm. Replacement aftermarket part for the following OEM numbers:Ka...
Both mirrors have 10mm right-hand thread x standard pitch of 1.25mm. Glass outer diameter 95mm. Total outer diameter 105mm. 140mm stem lengt...
Outer diameter 48.5mm. Inner diameter 43mm. Width 20mm.
Inner diameter 35mm. Outer diameter 54mm. Length 31mm. Replacement aftermarket part for the following OEM numbers: Honda 51425-375-003, 5142...
Suitable for early Japanese motorcycles up to 750cc. Black body and spring. 335mm centre to centre of bolt holes. Top pin hole ID 14mm - wid...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 35mm x OD 48mm x Thickness 11mm. Push-over type fork dus...
These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...
Suitable for early Japanese motorcycles up to 750cc. Chrome body and spring. 335mm centre to centre of bolt holes. Top pin hole ID 14mm - wi...
Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...
Length of lever: 170mm. Replacement aftermarket part for Honda OEM 53178-399-700, 53178-431-780.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Koyo 6305DDU. 2RS double sealed. Inner diameter 25mm. Outer diameter 62mm. Width 17mm. Single row deep groove ball bearing with two rubber s...
Please Note: The ball end of this clutch lever is small so if purchasing our brake lever SKU: 014396 with a large ball end they will not mat...
Inner diameter 30mm. Outer diameter 50mm. Width 14mm.
Made in Japan.
Non-asbestos. Outer diameter 51mm. Inner diameter 39mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Fits on to original 22mm standard indicator stem. Lens OD: 94mm. Total length: 120mm. Robust, lightweight, and weather resistant. Complete w...
Parts suitable for this fuel cap: Fuel cap latch and pin - SKU: 012448. Fuel cap lock - SKU: 012449. Replacement aftermarket part for Honda ...