Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Made in Japan. Replaces Honda 45520-MG7-000 .
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Replacement aftermarket part for the following OEM numbers: Honda 34903-388-611, 34903-KCS-920. and many more TBA.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Thread 8mm. Spanner size 12mm.
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 4...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Outer diameter 50mm. Inner diameter 40mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Honda 91258-410-013, 91258-...
Made in Japan. Replacement aftermarket part for Honda OEM 90543-MV9-670, 90453-MV9-670, 90401-KWW-C00, 90543-GFC-950, 90543-KRM-840, 90543-K...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
Koyo 6203-DDU/2RS 6203-2RS-C3. For non-sealed bearing use SKU: 007534. Inner diameter 17mm. Outer diameter 40mm. Width 12mm. Made in Japan. ...
Outer diameter: (including teeth) 119mm. Inner diameter: 90mm. Thickness: 3.1mm. Number of pegs: 8. Replaces: Vesrah VP1019. Replacement aft...
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
