Thread diameter: 49mm. Supplied with cylinder cap, diaphragm and diaphragm plate. Made in Japan. Replacement aftermarket part for the follow...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Made in Japan. Replaces Honda 45520-MM5-006, 45520-MZ0-760.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 435...
Kit contains a pair of fork dust seals.
Outer diameter 18mm. Inner diameter 8mm. Width 5mm.
Piston outer diameter 27mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Outer diameter 14mm. Length 39mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 22886-MB0-305. Kawasaki ....
Length 85mm. Width 43mm. 70mm between fixing hole centres. Made in Japan. Replacement aftermarket part for Honda OEM 45513-MM5-006, 45513-MM...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
