Made in Japan. Replaces Honda 45520-MG7-000 .
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Outer diameter 18mm. Inner diameter 8mm. Width 5mm.
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Made in Japan. Replaces Honda 45520-300-000.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Inner diameter 43mm. Outer diameter 54mm. Thickness 11mm.
Replacement aftermarket part for the following OEM numbers: Honda: 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J...
Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Note: This cap's OD is 114mm - if yours is 112mm - please search for our SKU: 012495. Outer diameter: 114mm. Outer diameter of the cap body ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43.1mm. Width 15mm. Thickness 1.95mm. Replace...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
