Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for for the following OEM numbers: Honda...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Outer diameter 50mm. Inner diameter 40mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Honda 91258-410-013, 91258-...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Made in Japan. Replacement aftermarket part for Honda OEM 90543-MV9-670, 90453-MV9-670, 90401-KWW-C00, 90543-GFC-950, 90543-KRM-840, 90543-K...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 16155-397-971, 16155-413-751, 16155-GCC-770, 16155-GZ5-000,...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Bosch Type BA20D bulb holder use our SKU: 018112.
Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Bosch Type BA20D bulb holder use our SKU: 018112. Replacement aftermarket part for the following OEM numbers: BMW 07119978006.12v. Honda CY7...
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
