Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Made in Japan. Replaces Honda 45520-MG7-000 .
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Kit contains a pair of fork dust seals.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Replacement aftermarket part for the following OEM numbers: Honda: 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J...
Made in Japan. Replaces Honda 45520-300-000.
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Note: This cap's OD is 114mm - if yours is 112mm - please search for our SKU: 012495. Outer diameter: 114mm. Outer diameter of the cap body ...
Please Note: These fairing brackets are cheap and nasty in our opinion, they may be marked, have small area of paint missing, and the mounti...
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Koyo 6205DDU. DDU version of 2RSHC3HMTF7. Double sided rubber sealed. Outer diameter: 52mm. Inner diameter: 25mm. Width: 15mm. Made in Japan...
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
