Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Made in Japan. Replaces Honda 45520-MG7-000 .
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Kit contains a pair of fork dust seals.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Replacement aftermarket part for the following OEM numbers: Honda: 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Made in Japan. Replaces Honda 45520-300-000.
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
This oil filter remover will only fit filters supplied by Motorcycle Products.
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Note: This cap's OD is 114mm - if yours is 112mm - please search for our SKU: 012495. Outer diameter: 114mm. Outer diameter of the cap body ...
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
