Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Made in Japan. Replaces Honda 45520-MG7-000 .
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement aftermarke...
Replacement aftermarket part for the following OEM numbers: Honda 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J0...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Made in Japan. Replaces Honda 45520-300-000.
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Please note: you will need to purchase all clutch plates metal and friction listed for this model to make up the original factory stack heig...
Note: This cap's OD is 114mm - if yours is 112mm - please search for our SKU: 012495. Outer diameter: 114mm. Outer diameter of the cap body ...
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
Koyo 6005DDU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 25mm. Width 12mm. Made in Japan. Replacement upgraded part for...
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Outer diameter 54.5mm. Inner diameter 48.5mm. Width 28mm.
Non-asbestos. Outer diameter 43mm. Inner diameter 35mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Length 54mm. Width 36mm. 2 screw cap. Supplied with diaphragm and screws. Made in Japan.
Piston outer diameter 32mm. Each kit contains an inner oil seal and an outer dust seal. Thickest seal: 3.17mm x 2.72mm. Thinner seal: 1.96mm...
Height 67mm. Width 69mm. Thread 20mm. Pitch 1.50mm. Replacement for Hiflofiltro HF204, HF128. This filter does not come with an O-ring. This...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
