Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Kit contains a pair of fork dust seals.
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.5mm. Inner diameter 39.5mm. Width 20mm. Thickness 1mm.
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Note: This seal has a 47.0 mm outer diameter. OEM spec is 47.2 mm. Please confirm fitme...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Koyo 6204-2RS-C3. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan. Replacement aftermarket p...
Outer diameter: 47mm. Inner diameter: 30mm. Width: 7.5mm. Replacement aftermarket part for the following OEM numbers: Aprilia: AP8125773, AP...
NTN 6204LLU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Please note: you will need to purchase all clutch plates metal and friction listed for this model to make up the original factory stack heig...
Height 67mm. Width 69mm. Thread 20mm. Pitch 1.50mm. Replacement for Hiflofiltro HF204, HF128. This filter does not come with an O-ring. This...
Koyo 63/22-DDU/2RS 63/22-2RS-C3. Inner diameter 22mm. Outer diameter 56mm. Width 16mm. Made in Japan.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies o...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
108mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1034. R...
