Straight TR4 valve.
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Thread 8mm. Spanner size 12mm.
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.1mm. Width: 12mm. Thickness: 1.95mm. Rep...
Inner diameter 43mm. Outer diameter 54mm. Thickness 11mm.
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Koyo 6204-2RS-C3. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan. Replacement aftermarket p...
Straight TR6 valve.
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.10mm. Width: 12mm. Thickness: 1.95mm. Re...
Replacement aftermarket part for the following OEM numbers: Honda 91015-KT8-005, 91015-MB4-770, 91015-MB4-771, 91015-MY5-860. Triumph T38000...
Replacement aftermarket part for following OEM numbers: - Please Note: Some Honda OEM numbers listed are a different style but fit. Honda 53...
Koyo 63/28. Outer diameter 68mm. Inner diameter 28mm. Width 18mm. Made in Japan.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Upper or Lower depending on whether standard or USD forks. Outer diameter 43.6mm. Inner diameter 41.6mm. Width 15mm. Thickness 1mm.
Outer diameter 28mm. Inner diameter 14mm. Width 7mm.
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Outer diameter 28mm. Inner diameter 20mm. Width 5mm.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Outer diameter 139mm. Thickness 1.5mm. Number of pegs 28. ID 104mm from tip to tip of peg. ID 112mm from in-between pegs. 6mm between pegs.
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
