Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Length of smooth section: 70mm. Thread for mounting: 10mm. Thread pitch: 1.25mm. This indicator stem fits front right, front left, rear righ...
On, off and reserve positions. Thread 16mm. Pitch 1.50mm. 6mm right hand outlet. Takes pipe with a 6mm inner diameter. Replacement aftermark...
These stems do not Include fixing screws please use your originals or purchase from a local hardware store. Please note: some modification m...
Straight TR4 valve.
Length 40mm. Push-over style. Open both ends. Oval fitting.
Non-asbestos. Outer diameter 46mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Outer diameter 42mm. Inner diameter 26mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Honda OEM 91252-230-000, 91...
Length: 33" (840mm). Clock fit: screw-over 11mm. Bottom end: push-in 15mm side screw. Type: square/fork.
Length: 25" (635mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/fork.
Outer diameter 48.5mm. Inner diameter 43mm. Width 20mm.
Outer diameter 18mm. Inner diameter 12mm. Width 3mm.
This kit includes the following bearings: Bearing 1: ID 26mm x OD 48.5mm x Thickness 15mm. Bearing 2: ID 30mm x OD 50mm x Thickness 14mm.
Length: 42" (1065mm). Clock fit: screw-over 11mm. Bottom end: push-in 15mm side screw. Type: square/fork. Replacement aftermarket part ...
Outer diameter 28.9mm and 32.0mm. Inner diameter 14.25mm. Width 16.25mm. Made in Taiwan. Replacement aftermarket part for the following OEM ...
Fits fork tube diameter: 33mm. Push-over internal diameter: 52mm. Overall length: 31mm. Type: Push over fork dust seal.
Length 75mm. Width 50mm. 4 screw cap. Supplied with diaphragm, O-ring and screws. Made in Japan.
Length of lever: 170mm. Replacement aftermarket part for Honda OEM 53178-399-700, 53178-431-780.
Outer diameter 28mm. Inner diameter 17mm. Width 7mm.
Inner diameter 33mm. Outer diameter 46mm. Thickness 14mm.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 33mm x OD 46mm x Thickness 10.5mm. Push-over type fork d...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-371-006.
Please Note: The ball end of this clutch lever is small so if purchasing our brake lever SKU: 014396 with a large ball end they will not mat...
