Steel sprocket. ID 58mm. PCD (Pitch Circle Diameter) 90mm. Mounting holes OD 4 at 8.5mm and 4 at 10.5mm (Fits larger range). Wheel indent 1....
Outer diameter 56mm. Inner diameter 28mm. Width 8mm.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 30250-041-004, 30250-035-005. and many more TBA.
12v Rectifier fits many models including those using the Chinese GY6 engine. Replaces Shindengen: SH591-12, SH634-12 SH570-6, SH570-12, SH61...
Brand: JT Sprockets. Position: Rear. Tooth Count: 38. JT Part Number: JTR269.38. Type: Standard. Material: Steel. Fitment: Direct replacemen...
4 wires with bullet connectors. 2 keys included.
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR269.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR269.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 35. JT Part Number: JTR269.35. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Steel sprocket. Replaces JT Sprockets JTF274-15.
Brand: JT Sprockets. Position: Rear. Tooth Count: 34. JT Part Number: JTR269.34. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Steel sprocket. Replaces JT Sprockets JTF274-14.
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. Standard 2.5mm copper core cent...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF274.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF274.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer diameter 33mm. Inner diameter 22mm. Width 7mm.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
Inner diameter 22.5mm. Outer diameter 41mm. Width 12.5mm.
Right-handed 8mm clockwise thread. Glass width: 115mm. Glass height: 80mm. Stem length: 140mm. 30mm from bend to end of thread. Please note ...
Alloy Version. Replacement aftermarket part for Honda OEM 53175-399-700, 53175-116-690, 53175-149-000.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
