Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Outer diameter 18mm. Inner diameter 8mm. Width 5mm.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement aftermarke...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Made in Japan. Replaces Honda 45520-300-000.
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
