WRP CV Boots are manufactured from high-performance DCR66 rubber. Installation is straightforward using the supplied easy fit mounting clamp...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...
Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 435...
Made in Japan. Replaces Honda 45520-MG7-000 .
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Outer diameter: 41mm. Inner diameter: 35mm. Width: 25mm. Replacement aftermarket part for the following OEM numbers: Honda 18392-ML0-000, 18...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs.
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 4...
Change the CV boot while out on the trail without having to disassemble the CV axle. Expandable yet durable material - specifically designed...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Outer diameter 12.7mm. Length 37mm. Spring length 40mm. Replacement aftermarket part for the following OEM numbers: Honda 43520-MJ6-315, 435...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 16155-397-971, 16155-413-751, 16155-GCC-770, 16155-GZ5-000,...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-166-016.
Please note: you will need to purchase all clutch plates metal and friction listed for this model to make up the original factory stack heig...
