Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Koyo 6305-DDU/2RS 6305-2RS-C3. Double sided rubber sealed. Inner diameter 25mm. Outer diameter 62mm. Width 17mm. Single row deep groove ball...
Replacement aftermarket part for the following OEM numbers: Honda 35340-MA5-671, 35340-MY5-860, 35340-ML7-000, 35340-KRF-T00, 35340-KSY-880,...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Koyo 6304 DDU. Double sided rubber sealed. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan. Replacement aftermarket part...
An excellent choice for vintage bikes and smaller bikes with less torque, the NZ series chain is a great non-sealed option. Its solid bushin...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 530VX...
This oil filter remover will only fit filters supplied by Motorcycle Products.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Comes with rivet link, no split link but these can be found under split links via search. The D.I.D ZVM-X Series utilizes our patented X-Rin...
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Replacement aftermarket part for Honda OEM 36100-MB1-701, 36105-MB1-000 Marked CF304 which is the same as a CF318.
Steel sprocket. Replaces JT Sprockets JTF339-18.
Steel sprocket. Replaces JT Sprockets JTF339-19.
Steel sprocket. Replaces JT Sprockets JTF339-16.
Steel sprocket. Replaces JT Sprockets JTF339-15.
Steel sprocket. Replaces JT Sprockets JTR334-42. ID: 80mm. OD: 110mm . PCD: 532mm. 5 bolt holes at 10.5mm and another 5 at 12.5mm.
Steel sprocket. Replaces JT Sprockets JTF339-17.
Steel sprocket. Replaces JT Sprockets JTR334-43. ID: 80mm. OD: 110mm . PCD: 532mm. 5 bolt holes at 10.5mm and another 5 at 12.5mm.
Steel sprocket. Replaces JT Sprockets JTR334-45. ID: 80mm. OD: 110mm . PCD: 532mm. 5 bolt holes at 10.5mm and another 5 at 12.5mm.
Brand: JT Sprockets. Position: Rear. Tooth Count: 43. JT Part Number: JTR1334.43. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR1334.45. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Replacement aftermarket part for the following OEM numbers: Honda 15410-679-013, 15410-MB3-003, 15410-MJO-003. This will suit the following ...
68mm between bolt hole centres. 8 wires. Made in Japan. Regulator/Rectifier Fitting InstructionsWhen on test, 12 Volt batteries should show ...
12v CDI ignition coil. Replaces: TEC EW82-TR1, FW82-TR1. Two spade terminals. Centre-to-centre distance between mounting holes: 100mm. Dual ...
