Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Replacement for the following OEM numbers: Honda 35340-MA5-671, 35340-ML7-000, 35340-MM5-600, 35340-MY5-860, . Kawasaki 27010-1170, 27010-00...
Replacement part for Honda OEM 53175-MK7-671, 53175-KE8-006, 53175-KM4-006, 53175-MB0006, 53175-MB1-006, 53175-MJ0-006, 53175-MJ6-006. This ...
With Staggered Pins.
Made in Japan. Replaces Honda 45520-MG7-000 .
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement part for Honda OEM 45132-166-016.
Thread 10mm. Spanner size 14mm. Replacement part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-670m, 90308-...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan to OEM specification. Replacem...
Replacement part for the following OEM numbers: Honda 34901-MC7-602, 34901-MAK-000, 34901-MC7-601, 34901-KEB-620, 34901-MAK-F00. Kawasaki 92...
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces Lucas LLB382 12v 21w Ba15s SCC S25. Replacement part for t...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement part for Honda OEM 45133-MA3-006, 45133-KCN-750, ...
Inner diameter 35mm. Outer diameter 48mm. Thickness 11mm. Replacement part for the following OEM numbers: Honda 91255-KBH0-03, 91255-300-023...
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan to OEM specification. Replacem...
Length: 92mm. Fitting shape square. Hole size: 20mm.
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement part for t...
For use with 12v bulbs up to 23 watt. Rectangle body. Suitable for hazards and any other relay that is 21w x2 +3.4w to 23w x2 +3.4w. Maximum...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a higher rating. Replacement par...
Thread: 6mm. Length: 20mm. Bolts: x10. Washers: x10.
10mm thread. Male / female. Designed to fit between mirror and stem for part numbers 011882 and 011919. Can be used to increase the height o...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
