These bars are 790mm long with 29mm centre section tapering down to 25mm. The 29mm centre section is 200mm long with 290mm x 25mm ends for c...
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Replacement part for the following OEM numbers: Honda 34901-MC7-602, 34901-MAK-000, 34901-MC7-601, 34901-KEB-620, 34901-MAK-F00. Kawasaki 92...
Length: 92mm. Fitting shape square. Hole size: 20mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Replacement part for Honda OEM 53175-MK7-671, 53175-KE8-006, 53175-KM4-006, 53175-MB0006, 53175-MB1-006, 53175-MJ0-006, 53175-MJ6-006. This ...
Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces Lucas LLB382 12v 21w Ba15s SCC S25. Replacement part for t...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
With Staggered Pins.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement part for Honda OEM 45132-166-016.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Replac...
Outer length: 1000mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 140mm. Inner top nipple: barr...
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.5mm. Inner diameter 39.5mm. Width 20mm. Thickness 1mm.
Replacement for the following OEM numbers: Honda 35340-MA5-671, 35340-ML7-000, 35340-MM5-600, 35340-MY5-860, . Kawasaki 27010-1170, 27010-00...
Outer diameter 37.5mm. Inner diameter 32mm. Width 26mm.
Length 85mm. Width 43mm. 70mm between fixing hole centres. Made in Japan. Replacement part for Honda OEM 45513-MM5-006, 45513-MM5-016, 45520...
Made in Japan. Replaces Honda 45520-MM5-006, 45520-MZ0-760.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement part for Honda OEM 45133-MA3-006, 45133-KCN-750, ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 15mm. Thickness 2mm.
Outer diameter 47.2mm. Inner diameter 28mm. Width 7mm. Replacement part for the following OEM numbers: Honda 91252-MC4-013, 91252-MC4-003, 9...
Fits 10mm (3/8") inner diameter fuel line. Filter Inlet OD: 10.5mm. Filter Outlet OD: 10.5mm. Filter Inlet ID: 8mm. Filter Outlet ID: 8...
Inner diameter 38mm/40mm. Length 28mm/33mm. Made in Japan to OEM specification.