Made in Japan. Replaces Honda 45520-MG7-000 .
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Kit contains a pair of fork dust seals.
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Inner diameter: 38mm/40mm. Length: 28mm/33mm. Also known as carburettor intake manifold rubbers. Made in Japan. Replacement aftermarket part...
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Outer diameter 12.7mm. Length 48.6mm. Spring length 40mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 4...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
