Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Inner diameter: 38mm/40mm. Length: 28mm/33mm. Also known as carburettor intake manifold rubbers. Made in Japan. Replacement aftermarket part...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Outer diameter 42mm. Inner diameter 28mm. Width 8mm.
Made in Japan. Replaces Honda 45520-MG7-000 .
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Straight TR4 valve.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
101mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1042. R...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Kit contains a pair of fork dust seals.
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
