Honda XR125 L 2007 Parts

54 Tooth Rear Sprocket - 004680

Steel sprocket. Replaces JT Sprockets JTR250-54.

51 Tooth Rear Sprocket - 004606

Steel sprocket. Replaces JT Sprockets JTR250-51.

Air Filter - 016121

This will suit the following models as well as those listed in fitments: Honda NXR125 ES3 Bros Electric Start (Brazil) 2003. Honda NXR125 KS...

JT Sprockets 54 Tooth Rear Sprocket JTR1258.54

Brand: JT Sprockets. Position: Rear. Tooth Count: 54. JT Part Number: JTR1258.54. Type: Standard. Material: Steel. Fitment: Direct replaceme...

10.5mm x 7.3mm x 4.5mm Valve Stem Oil Seals

Outer diameter 10.5mm. Inner diameter 7.3mm. Stem 4.5mm.

27mm Brake Caliper Piston Seal Kit

Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...

Steering Head Ball Bearing Kit - 013077

This kit includes the following bearings: Bearing 1: ID 26mm x OD 47mm x Thickness 15mm. Bearing 2: ID 26mm x OD 47mm x Thickness 15mm.

15mm x 1mm Piston Circlips

12v 2-Pin Rectangle Indicator Relay

Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...

TourMax 27mm Brake Caliper Piston Seal Kit

Piston outer diameter 27mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...

IRIS 428RX-132 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...

Steering Head Taper Bearing Kit SSH902R, SSH902 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 26mm x OD 47mm x Thickness 15mm. Bearing 2: ID 26mm x OD 47mm x Thick...

LED & Standard 12v indicator Relay Universal

For use on 12v bulbs upto 23w.

All Balls 25-1206 Wheel Bearing Kit

DID 428D-132L Gold Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

DID 428D-132L Black Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

Black 12v 75mm Diameter Horn Pair

C-Max brand. Single bolt hole mount. Outer diameter 75mm. 116 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied ...

DID 428VX-132L Gold Heavy Duty X-Ring Drive Chain

The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. Giving yo...

RK 428-132L HSB Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

DID 428HD-132L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

DID 428NZ-132L Gold Heavy Duty Pro-MX Drive Chain

Great for mini and vintage bikes, the 428NZ is a great non-sealed option that will give you greater performance than the OEM non-sealed chai...

NGK LD05F Red Spark Plug Cap

Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. 5 kilo ohm. Terminal stud. Water resistant, vibration resistant a...

NGK DPR8EIX-9 Iridium Spark Plug

Thread 12mm x hex 18mm x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium ...

JT Sprockets 16 Tooth Front Sprocket JTF264.16

Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF264.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 14 Tooth Front Sprocket JTF264.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF264.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...