Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...
Outer diameter 110mm. Width 25mm. Springs available separately SKU: 001876. Replaces the following brand numbers: Agpa M301. Cobreq 0304-CP....
30mm between hook centres. Thickness 6.85mm.
Outer diameter 11mm. Inner diameter 7.75mm. Stem 5.3mm.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 68mm. Width 37mm. Replacement aftermarket part f...
52mm between hook centres. Thickness 6.10mm.
Outer diameter 110mm. Width 25mm. Springs for these shoes SKU: 001880. How to measure drum brake shoes: Outer Dimension: Preferably use a ca...
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends.
Koyo 6304. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan.
Outer diameter: (including teeth) 119mm. Inner diameter: 90mm. Thickness: 3.1mm. Number of pegs: 8. Replaces: Vesrah VP1019. Replacement aft...
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Outer diameter 29mm. Inner diameter 18mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Honda 91203-KEJ-900, 91204-...
28mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 23802-040-000. and many more TBA.
Metal outer. Outer diameter 60mm. Inner diameter 48mm. Width 6.5mm.
Inner diameter 27mm. Outer diameter 39mm. Thickness 10.5mm.
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Straight TR4 valve.
Length of lever: 170mm. Replacement aftermarket part for Honda OEM 53178-399-700, 53178-431-780.
This fuel cap does not fit the CB125 J & S 1976 models. Locking version. Outer diameter of the cap body that sits over the tank filler n...
Please Note: The ball end of this clutch lever is small so if purchasing our brake lever SKU: 014396 with a large ball end they will not mat...
Outer diameter 36mm. Inner diameter 19mm. Width 7mm.
Outer diameter 37mm. Inner diameter 20mm. Width 8mm.
Inner diameter 24mm. Outer diameter 41mm. Width 12.5mm.
Outer diameter 24mm. Inner diameter 11.6mm. Width 10mm.
Outer diameter 37mm. Inner diameter 26mm. Width 6mm. Replacement aftermarket part for the following OEM numbers: Honda 90753-051-003, 90753-...
Outer diameter: 110mm. Inner diameter (including teeth): 83mm. Inner diameter (excluding teeth): 90mm. Thickness: 1.65mm. Number of pegs: 24...
Steel sprocket ID including splines: 15mm. ID without splines: 17mm. Gap between each spline: 4mm. Bolt hole centres: 28mm and 30mm. Number ...
