IRIS 530FB-106 Gold X-Ring Drive Chain

IRIS 530FB-106 Gold X-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search.

This final drive chain is the correct length and pitch for standard factory fitted sprockets.

• If you have odd sprockets with fewer or more teeth than standard you will have to select equivalent pitch and suitable length from our drive chain category. Always select a longer chain if in doubt, you can then cut it down with one of our chain tools, its not so simple to add links if its too short!
• Always go up or down in even numbers of teeth as odd numbers will make selecting the length of chain to suit, much more difficult for beginers

Chain Type Guide:

• Standard chain is a regular chain used on smaller bikes
• Heavy Duty is mostly aimed for midsized road bikes, most MX bikes can run on HD chain
• O-ring is a sealed chain mainly used on large road bikes. It's also used on some MX bikes, especially for Enduro use as they retain lubrication better than HD chains
• X-ring is a step up from O-ring, they hold lubrication even longer therefore providing less friction and will last longer when compared to a matching brand. An X-ring seal has two lips to seal, to keep lube in and dirt out as it sits flat, it seals better than the O-ring seal
• The life of O-ring chain is usually determined by the durability of the O-ring. To improve the durability, there should be an oil film on the O-rings at all times. Even though it is a sealed chain, lubrication is required to extend its working life
• However, make no mistake, a more expensive O-ring chain can easily out last a cheaper X-ring chain
• We now stock the latest grades of chain including the Z-ring from WRP, UWV narrow UW-ring (Perfect for large classics), XW-ring heavy duty and super heavy duty, XSO RX-ring heavy duty all from RK Takasago Chain