Kawasaki AR50 C 1997 Parts

107mm x 3.2mm Clutch Friction Plate with 8 Pegs

Outer diameter (including teeth) 107mm. Thickness 3.2mm. Number of pegs 8. Replacement for Vesrah VP4038.

RK Pro-MX 420-116L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

32mm x 22mm x 5mm Front Sprocket Oil Seal

Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...

Black Brake Lever - 014707

49 Tooth Rear Sprocket - 004543

Steel sprocket. Replaces JT Sprockets JTR801-49.

6v 2-Pin 23 Watt Indicator Relay 38300-GF0-405

For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...

6v/12v Ignition Coil Single Output + 1 Terminal AS41-CDI (60mm)

If your coil has 2 spades the second is for earth so before you fit the new one clean where it bolts to by scraping any paint or rust off th...

51 Tooth Rear Sprocket - 004615

Steel sprocket. Replaces JT Sprockets JTR801-51.

6 Wire Ignition Switch - 006680

6 wires with male spade block and bullet connectors. 2 keys included.

13 Tooth Front Sprocket - 003121

Steel sprocket. Replaces JT Sprockets JTF504-13, JTF249-13.

35mm x 20mm x 8mm Crank Oil Seal

Outer diameter 35mm. Inner diameter 20mm. Width 8mm.

35mm x 20mm x 8mm Crank Oil Seal

Outer diameter 35mm. Inner diameter 20mm. Width 8mm.

JT Sprockets 47 Tooth Rear Sprocket JTR801.47

Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR801.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 49 Tooth Rear Sprocket JTR801.49

Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR801.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 14 Tooth Front Sprocket JTF249.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF249.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 13 Tooth Front Sprocket JTF249.13

Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF249.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 51 Tooth Rear Sprocket JTR801.51

Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR801.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...

4 Wire Ignition Switch - 006679

4 wires with male spade block connector. 2 keys included.

JT Sprockets 15 Tooth Front Sprocket JTF249.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF249.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

NGK B6ES Spark Plug (Japan)

Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...

Top End Gasket Set - 010891

RK 420-116L Standard Drive Chain

Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...

DID 420D-116L Black Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

MTX 420HD-116 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

47 Tooth Rear Sprocket - 004436

Steel sprocket. Replaces JT Sprockets JTR801-47.

14 Tooth Front Sprocket - 003243

Steel sprocket. Replaces JT Sprockets JTF504-14, JTF249-14.

Universal Rectifier with 2 Offset Spade Connectors

Silicon rectifier. 2 offset spade connectors. Replacement aftermarket part for Honda OEM 31700-166-008, 31700-166-003. Regulator/Rectifier F...

15 Tooth Front Sprocket - 003377

Steel sprocket. Replaces JT Sprockets JTF504-15, JTF249-15.

16 Tooth Front Sprocket - 003491

Steel sprocket. Replaces JT Sprockets JTF504-16, JTF249-16.

41.00mm Piston Kit - 008713

Bore size 41.00mm. Gudgeon pin outer diameter 12mm. Crown height 16mm. Piston length 46mm. Ring peg position 9mm. 2 stroke. Without ports. P...